18 NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Turn on and off
1. To turn on either:
• Connect the battery
(see page 9), or
• If the battery is already
connected, short press
the button.
2. To turn off, either:
• Disconnect the battery
(see page 8), or
• Press and hold the
button for 5 seconds,
then release.
The light will change to
steady orange as the
processor turns off.
NOTE
Your processor will also turn off automatically after being off
your implant for two minutes, if enabled by your clinician.
DRAFT ONLY FOR CLINICAL TESTING
592753_1-06_EN_CP1000_UG_EMEA.indd 18 14/06/2016 1:23:06 PM
To Next Page
Loading...
