EasyManua.ls Logo

Cochlear Nucleus 7 CP1000 - Change microphone cover

Cochlear Nucleus 7 CP1000
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44 NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Change microphone cover
Replace your microphone protectors every three months,
or if they look dirty or you notice any loss in sound quality.
They are built into the Cochlear Nucleus 7 Microphone
Cover, which is completely replaced.
Microphone
protectors
Microphone
cover
Step 1: Remove old microphone cover
1. Hold the coil cable grip and
firmly pull it straight out of the
processor.
Do not tug on the flexible part
of the coil cable.
CAUTION
Do not twist the coil cable when
you pull it out of the processor.
2. Lift the microphone cover from
the bottom edge, then lift it up
to remove.
DRAFT ONLY FOR CLINICAL TESTING
592753_1-06_EN_CP1000_UG_EMEA.indd 44 14/06/2016 1:23:55 PM

Related product manuals