Cochlear Nucleus 7 CP1000 - Page 27

25NUCLEUS 7 SOUND PROCESSOR USER GUIDE
USE
3. Insert the battery module,
then twist to connect.
4. Plug the monitor
earphones into the
adaptor.
NOTE
Use only Cochlear-
approved earphones. Ask
your clinician for guidance
5. Use the earphones to check that the recipient is hearing
sound.
NOTE
Do not put the sound processor on the recipient’s implant.
DRAFT ONLY FOR CLINICAL TESTING
592753_1-06_EN_CP1000_UG_EMEA.indd 25 14/06/2016 1:23:13 PM