51NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Beeps
Your clinician can set up your processor so you can hear
the following beeps (they are only audible to you).
Turning on and off
BEEP WHAT IT MEANS
Short high beeps
Changing the program. The number of
beeps indicates the number of the selected
program.
Short high beep
Changing volume or sensitivity level
(if available).
Short high then short
low beep
When changing volume or sensitivity,
indicates upper or lower limit of volume/
sensitivity reached.
Locking button
BEEP WHAT IT MEANS
Short low beep when you press button
Processor button is
locked.
Short high then short low beep
Locking processor
button.
Short low then short high beep
Unlocking processor
button.
LIGHTS AND BEEPS
DRAFT ONLY FOR CLINICAL TESTING
592753_1-06_EN_CP1000_UG_EMEA.indd 51 14/06/2016 1:23:58 PM
To Next Page
Loading...
