Code CR1400 - Reader Feedback Settings

A1 A4A2 A3
B1 B2 B3
C1 C4C2 C3
D1 D4D2 D3
E1 E4E2 E3
B4
CR1400 Configuration Guide
NOTE: Configuration changes will take effect immediately and be saved to memory
Web Generated Configuration Guide
For questions regarding reader configuration contact support@codecorp.com.
19
RS232 Interface 8 Data Bits -
Default
RS232 Interface Stop Bits 1 -
Default
RS232 Interface Stop Bits 2 RS232 Interface Even Parity
RS232 Interface Odd Parity RS232 Interface No Parity -
Default
RS232 Interface Flow Control
Off - Default
RS232 Interface Flow Control
- Hardware
RS232 Packet Mode RS232 Raw Mode - Default Beep On Vibrate On - Default
Reader Feedback
Settings
Beep Off Vibrate Off Beep Off Vibrate On Beep On Vibrate Off Beep Volume 100% - Default
Beep Volume 67% Beep Volume 33% Beep Volume 0% Output Good Read on RTS line
Off - Default