Code CR1400 - Scan Delay Settings

A1 A4A2 A3
B1 B2 B3
C1 C4C2 C3
D1 D4D2 D3
E1 E4E2 E3
B4
CR1400 Configuration Guide
NOTE: Configuration changes will take effect immediately and be saved to memory
Web Generated Configuration Guide
For questions regarding reader configuration contact support@codecorp.com.
20
Output Good Read on RTS line
- Active Low
Output Good Read on RTS line
- Active High
Duplicate Scan Disabled -
Default
Scan Delay Settings
1 Second Duplicate Scan Delay 2 Second Duplicate Scan Delay 3 Second Duplicate Scan Delay 5 Second Duplicate Scan Delay
10 Second Duplicate Scan
Delay
30 Second Duplicate Scan
Delay
1 Hour Duplicate Scan Delay 1 Day Duplicate Scan Delay
Read Both Wide and High
Density Field - Default
Read Wide Field Only Locked Reader Accept Host
Commands - Default
Miscellaneous Settings
Locked Reader Reject Host
Commands
Reader ID and Firmware
Version
Reader Text Commands On
Reader/Modem
Command Settings