Code CR1500 - Reader;Modem Command Settings

A1 A4A2 A3
B1 B2 B3
C1 C4C2 C3
D1 D4D2 D3
E1 E4E2 E3
B4
.
CR1500 Conguration Guide
CR1500 Configuration Guide
NOTE: Configuration changes will take effect immediately and be saved to memory
Web Generated Configuration Guide
For questions regarding reader configuration contact support@codecorp.com.
24
Disable Upload Image Mode -
Default
Reader Information, limited,
1500 - Default
Intentionally Blank
Reader/Modem
Command Settings
Reset to Factory Defaults Save All Reader Settings Reboot Reader
Reset, Clear and Save
Reader Settings
Enable Verifone (Ruby) Defaults Enable Gilbarco Disable Gilbarco - Default
Custom Terminal
Settings
Enable NCR Disable NCR - Default Enable NCR2 Disable NCR2 - Default
Disable WINCNIX - Default Enable WINCNIX Enable UDI/HIBC Validation
Data Validation