Code CR900FD User Manual

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 48 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
6A
UPC/EAN Symbology
1
0: Disabled
1: Enabled
Note: Enables and disables all UPC and EAN barcodes (UPC-A,
UPC-E, EAN-13, EAN-8)
Keywords: #UPC, #EAN
6B
Code 39 Symbology
1
Binary Dip Switch
Bit
Controls
Value
0
Enable/Disable Code 39
0: Disabled
1: Enabled
1
Enable/Disable Code 32
0: Disabled
1: Enabled
Code 32 is also known as Italian Pharmacode. It uses the same
encoding as Code 39 and can be decoded as Code 39 with
unintended data when Code 32 is not enabled. It is not
necessary to enable Code 39 to enable Code 32.
Keywords: #Code39, #PharmaCode
6C
Code 93 Symbology
1
0: Disabled
1: Enabled
6D
Code 128 Symbology
1
0: Disabled
1: Enabled
6E
Interleaved 2 Of 5
Symbology
1
0: Disabled
1: Enabled
Keywords: #2Of5, #Interleaved2Of5
6F
Codabar Symbology
1
0: Disabled
1: Enabled
Keywords: #Codabar
70
Code 39 Checksum
0
0: Disable checksum checking and output checksum character
if one exists
1: Enable checksum checking and output checksum character
2: Enable checksum checking and remove checksum character
from output
If this register is set to a value greater than zero and no
checksum is present in the barcode or the checksum is
incorrect, the barcode will not read.
Keywords: #Code39

Code CR900FD Specifications

General

Brand	Code
Model	CR900FD
Category	Barcode Reader
Language	English