Code CR900FD - Page 64

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 64 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
137
PDF417 Handle Invalid
Shift
0
0: Disabled
1: Enabled
Allows the decoding of PDF417 barcodes that were improperly
encoded.
Note: This register has no effect on a CR900FD without the
proper 2D barcode decoding license.
Keywords: #PDF417
154
Enable Black And
White Pictures
0
0: Images remain in grey scale.
1: Captured images are converted to black and white.
Converts grey scale images to black and white
Keywords: #PictureSettings
159
Ignore Duplicate
Barcode (ms)
0
Valid Range: 0 to 7FFFFFF Milliseconds
Consecutive duplicate barcodes (i.e. barcodes that contain the
same data) are blocked for this amount of time (in
milliseconds). 0 turns off blocking of duplicate barcodes.
Note: For the CR5000 & CR5000RTC only, the reader will
continue to block duplicate barcodes as long as it continues to
detect the barcode, and until the barcode has been removed
for the “ignore duplicate barcode” time, if the time is not 0. In
other words, for the CR5000 & CR5000RTC, to scan the same
barcode twice, the barcode must be removed from the field of
view for this period of time.
Keywords: #StandModes, #DuplicateBlock
172
Automatically save the
Bluetooth® connection
address
CR2300:
CR2600:
CR2600XHD:
CR3600:
CR3600DPM:
1
0: Disable
1: Enable
The address in the QuickConnect Barcode will be saved if
enabled.
Note: Only applies to readers using Bluetooth® communication
modes.
173
Enable Bluetooth®
Encryption
0
0: Disable
1: Enable
Note: PIN must be set to 8 characters or more and the same
value on the reader and remote device for connection to be
successful. For CodeXML Modems, please refer to the D018582
Modem ICD document for details on the setPin command.
Keywords: #Encryption