CODEL Operation and Maintenance Manual
Issue : A Rev. : 3 Date : 13/11/2018 Ref. : 100351
P a g e | 9
3.8 Installation Material
Installation Bolts
Sensor Body:
No.:
4
Dimensions:
180 (L) x 180 (H) (mm)
Bolt Thread Type:
M6
Bolt Length:
60 (mm) or to suit application
24V Power Supply:
No.:
4
Dimensions:
180 (L) x 180 (H) (mm)
Bolt Thread Type:
M6
Bolt Length:
60 (mm) or to suit application
Tunnel Display Unit:
No.:
4
Dimensions:
110 (L) x 140 (H) (mm)
Bolt Thread Type:
M6
Bolt Length:
60 (mm) or to suit application
Note: The TunnelTech 500 PCBs are equipped with built-in RS485 communications facilities for use during
commissioning. This facility may further be used after commissioning for communication to integrate
the TunnelTech 500 using MODBUS protocol – further details are contained in Appendix A.
To Next Page
Loading...