CODEL
Operation and Maintenance Manual
Issue : A Rev. : 3 Date : 13/11/2018 Ref. : 100351
P a g e | 21
5.5.2 Relay Direction
The relay system allows the user to configure if the relay channel is set to normally open or normally closed. This
option is useful in fail-safe environments where power outages are common, forcing the connected relays to
switch in case of power failure.
Pressing allows the user to toggle between these two states.
Using the or keys cycles between the “Normal” and “Reverse” options, with setting the chosen
output, returning the user to the previous menu tier.
5.5.3 Relay Alarm Level
The Relay alarm trigger is based on the currently displayed value and will toggle the relay when the alarm value
is exceeded.
WARNING: The relay alarm level should never exceed the span level for the channel it is reading,
doing so could result in an alarm never being set.
By pressing the key, the user can adjust the value for the selected relay channel.
Using the or keys, manipulates the onscreen value with the key moving to the next available
location or setting the entered value if all fields are complete.
To Next Page
Loading...