EXTRACT DUCT CLEANING
(1) Open the door of the machine and switch machine off using the main
switch.
(2) Turn the ingredient nozzles upwards to prevent ingredient spillage and
remove all canisters and extract hoods.
(3) When all the canisters and hoods have been taken out, the extract duct
cover can be removed by lifting it upwards and then forwards toward the
front of the machine.
(4) Thoroughly clean both the extract duct and its cover.
(5) Refit the cover & replace the canisters.
(6) Ensure all ingredient chutes are correctly positioned.
(7) Switch on the machine and perform a flush operation.
To Next Page
Loading...
