REFITTING THE TEA BREWER
(10) Refit brewer cylinder.
(11) Refit the mixing chamber.
(12) Refit brewer carriage onto machine. If it does not locate correctly, gently
turn filter belt using the studded roller until it slides into place.
(13) Lock the carriage in place by returning the release lever to the horizontal
position; ensure that the groove on the lever engages with the slot on the
shaft and that the carriage is secure.
(14) Refit the tealeaf waste chute followed by the outlet elbow and mixing
bowl
(15) Turn tea canister dispense chute downward into mixing bowl.
(16) Switch machine back on. Ensure that hands and loose clothing are clear of
the brewer(s).
(17) Close and lock the machine door as instructed.
(18) Once machine has reset, test at least one Tea.
To Next Page
Loading...
Need help?
General