FILLING
Instant Products
(1) Turn the ingredient dispense chutes to face upwards to prevent ingredient
spillage. Remove the instant product ingredient canisters from the machine.
Remove the lid from each one in turn and fill it with the correct ingredient
refitting the lid afterwards.
(2) Place the canisters back in the machine ensuring that each one is in the
correct position. Return the ingredient chutes to the correct dispense
positions.
(3) Restore the mains electrical supply to the machine and set the on/Off switch
on the machine to ON.
(4) Once the machine is powered up and turned on press the FLUSH button on
the internal touch panel to ensure all residues has been removed from the
mixing chambers when nozzles were being moved.
Bean Hopper
(1) Remove the bean hopper lid and remove it. Fill the hopper with sufficient
beans for the days anticipated use. Refit the hopper lid. Note any foreign
objects that fall into the hopper should be retrieved before the machine is
used further or damage to the grinder may result.
To Next Page
Loading...
Need help?
General