COFFEtek VITRO S3 RANGE - Page 20

COFFEtek LTD
VITRO S3
Revision 1
28/02/2017
20
 The display will show:
DRINK 03 NAME IS
<DRINK NAME> (IF NAME IS CORRECT MOVE TO STEP 4)
where <DRINK NAME> is the displayed name for that drink, e.g. Coffee.
 To change the name Press ENTER. The display will show:
<DRINK NAME>
,  ENTER OR ESC
 Use the   keys to scroll through the available drink names. Press ENTER to
confirm the new name or ESC to return to the old one.
A limited number of names do affect the function of the buttons to which they are
assigned. These special names and their effects are listed in the following table:
GO LARGE / ALT KEY
This button becomes a ‘GOING LARGE / ALT KEY’
key. If pressed the machine will emit two beeps to show
it is in ‘large/alt’ mode and the next drink to be selected
will use the alternative set of presets associate with the
other selection buttons. Typically these alternate
selections will have been set to give a larger version of
the standard drink in order to realise a GO LARGE
function. Equally though the alternative selection could
be configured to give Decaf selections.
 If drink name is correct, use ,  to step through the program. The display will
show:
USES NOZZLE000
 Press ,  to show Ingredient Settings. Display will show:
Where <ING A> is the
name of the ingredient
assigned to bin A (see
EDIT BIN NAMES).
Typically ingredient A
is Milk
<ING A>
000 (Start)
Time after button pressed that
ingredient A motor starts in tenth of a
second.
<ING A>
000 (Duration)
Time for which ingredient A motor
runs in tenths of a second.
Typically ingredient B is
Chocolate
<ING B>
000 (Start)
Time after button pressed that
ingredient B motor starts in tenth of a
second.