COFFEtek VITRO S3 RANGE - Page 21

COFFEtek LTD
21
28/02/2017
Revision 1
VITRO S3
<ING B>
000 (Duration)
Time for which ingredient B motor
runs in tenths of a second.
Typically ingredient C
is Coffee
<ING C>
000 (Start)
Time after button pressed that
ingredient C motor starts in tenth of a
second.
<ING C>
014 (Duration)
Time for which ingredient C motor
runs in tenths of a second.
Typically ingredient D
is Espresso or Decaf
<ING D>
000 (Start)
Time after button pressed that
ingredient D motor starts in tenth of a
second.
<ING D>
000 (Duration)
Time for which ingredient D motor
runs in tenths of a second.
<WATER D>
000 (Start)
Time after button pressed that
dispense valve associated with
ingredient A/B mixer system opens.
<WATER A>
000 (Duration)
Time for which A/B dispense valve
opens in tenths of a second.
<WATER D>
000 (Start)
Time after button pressed that
dispense valve associated with
ingredient D mixer system opens.
<WATER D>
030 (Duration)
Time for which D dispense valve
opens in tenths of a second.
<WHIPPER A>
000 (Start)
Time after button pressed that A/B
mixer motor begins to run.
< WHIPPER A >
000 (Duration)
Time for which A/B mixer motor runs
in tenths of a second.
<WHIPPER D>
000 (Start)
Time after button pressed that D
mixer motor begins to run.
< WHIPPER D >
008 (Duration)
Time for which D mixer motor runs in
tenths of a second.
HOT WATER
010 (Start)
Time after button pressed that hot
water dispense valve opens.
HOT WATER
000 (Duration)
Time for which hot water dispense
valve opens.
FLUSH BOWL A
060 (Start)
At the end of a dispense cycle it is
possible to program a small amount of
water through the large mixing system
to clean it and prevent drips. These
parameters control the timing of this
FLUSH BOWL A
010 (Duration)