COFFEtek VITRO S3 RANGE - Page 27

COFFEtek LTD
27
28/02/2017
Revision 1
VITRO S3
 If ENTER is pressed during the file writing process the display will show,
PLEASE WAIT
 Once the file has been successfully written the display will show,
MACHINE CONFIG
WRITTEN OK
 If a USB stick is not detected on entering the USB activities menu the display will
show,
PLEASE INSERT
USB STORAGE DEV’
 PLEASE NOTE: Do not remove the USB stick during the file writing process.
31. For a custom filename select NO when the display is on the default file screen. The display
will then show…
FILE :-
4567890 ABCDEFGH (FLASHING DIGIT)
 The filename can be up to 8 chars and directly above the flashing ‘A’ char is the first
character of the filename which defaults to a space.
 Use the  (LEFT)  (RIGHT) to scroll through the permitted chars on the bottom
line. You can hold the key down to scroll faster or a single touch will scroll by a
single character.
 Pressing the * (STAR) key on the internal keypad will place the character
highlighted by the cursor in the filename at the current position. The display will
show…
FILE :- A
34567890 ABCDEFG (FLASHING DIGIT)
 The cursor will move along one position to denote that you are now editing the
second character of the filename. Pressing the * (STAR) key again will make the
display show…
FILE :- AA
234567890 ABCDEF (FLASHING DIGIT)
 Note the bottom line centres on the previously entered character (or ‘A’ for the first
character) by default if the character hasn’t previously been edited otherwise it
centres on the current character of the filename. To modify the filename character
you can press the  (UP) key to move to the filename on the upper line of the
display. You can then use left and right to highlight the character that needs
correcting. For example, if you press  (UP) followed by the  (LEFT) key the
display will show…
FILE :- AA (FLASHING DIGIT)
234567890 ABCDEF
 Press  (DOWN) to move the cursor back to the bottom line and then press the *
(STAR) key to select the correct character. The display will show…
FILE :- AB
34567890 ABCDEFG (FLASHING DIGIT)
 Press the ENTER key when you have finished editing the filename or ESCAPE to
cancel the operation. If you select ENTER the file will be copied to …