COFFEtek VITRO S3 RANGE - Page 28

COFFEtek LTD
VITRO S3
Revision 1
28/02/2017
28
 FILE TYPE
 DESTINATION
 Configuration files
 "./Coffetek/Zmcu/Configs/"
 Timed Events
 "./Coffetek/Zmcu/TimEvts/"
 Prices
 "./Coffetek/Zmcu/Prices/"
 Audits
 "./Coffetek/Zmcu/Audits/"
SET MACHINE SERIAL NUMBER
32.
 Press ENTER, if not set press ENTER again. The display will show:
MACHINE SERIAL #
VALUE 00000 (FLASHING DIGIT)
 To set serial number press  (UP) to increase or  (DOWN) to decrease, or press
 (lLEFT)  (RIGHT) to move cursor.
I2C STATUS
33. The I²C status menu contains the following submenus;
 Plus 16 Status
 Coin Pod Status
For each of the above sub menus the following options are available;
Menu Item
Description
I2C ACKS
The number of successful messages transferred since power on. Can wrap
around to 0.
I2C NAKS
The number of unsuccessful messages transferred since power on. Can wrap
around to 0.
ISOLATION
TEST
Shuts down all I²C communication with other devices. Continues communication
with the device under test and feeds back real time ACKS or NAKS.

SET DATE
34. The SET DATE AND TIME menu configures the Real time clock facility now available on
the control board.