COFFEtek VITRO S3 RANGE - Page 29

COFFEtek LTD
29
28/02/2017
Revision 1
VITRO S3
35. To set the date press ENTER on the SET DATE AND TIME menu. The display will show,
SET DATE
,  ENTER OR ESC
 Press ENTER and the display will change to,
SET DATE
SAT 07/01/2000 (FLASHING DIGIT)
 Use the  (UP) key to increase or  (DOWN) to decrease, or press  (LEFT) 
(RIGHT) to move the cursor.
 Once the date is correct press the ENTER key to confirm your changes or press
ESCAPE to cancel them.
SET TIME
36. To set the time press ENTER on the SET DATE AND TIME menu. Then press the  (UP)
key or  (DOWN) key until the display shows,
SET TIME
,  ENTER OR ESC
 Press the ENTER key to adjust the time. The display will show,
SET TIME
TIME = 22:18 (FLASHING DIGIT)
 Use the  (UP) key to increase or  (DOWN) to decrease, or press  (LEFT) 
(RIGHT) to move the cursor until the correct time is visible and then press the
ENTER key. The display will then return to,
SET TIME
,  ENTER OR ESC
 Press the ESCAPE key to exit the menu
TIMED EVENTS
 The timed events menu allows you to use the time and date previously set up to
activate activities such as free vend periods for machines with payment systems,
machine inhibit periods or to perform periodic flushes.
 Press ENTER on the TIMED EVENTS menu and the Display will show,