COFFEtek VITRO S3 RANGE - Page 31

COFFEtek LTD
31
28/02/2017
Revision 1
VITRO S3
The value 380 is a number corresponding to the temperature setting.
The value (0,0) is the element status.
 Press PROG to exit from the TANK STATUS option and access the next Engineer's
Program option.
 Set the Credit Lock to 0.
CHANGE SETTINGS
38. CHANGE SETTINGS allows alteration of the following machine settings:
There are several submenus, that cover various aspects;
 TEMPERATURE SETTINGS
 MACHINE SETTINGS
 MAINTENANCE SETTINGS
 PAYMENT SYSTEM SETTINGS
 AUDIT SETTINGS
 TIMED EVENT SETTINGS
 LIGHTING SETTINGS
Temperature Settings
39.
Settings
Description
DESIRED
TEMP
86°C (0407)
Allows setting of normal operating temperature for the Instant boiler.
TEMP LOW
75°C (0332)
Allows setting of low cut-out point for the Instant boiler.
ECON TEMP
60°C (0230)
Allows setting of the Economy mode the Instant boiler will lower to if set in the
TIMED ACTIVITIES
CUP BOOST
Allows increase/decrease of temperature boost per cup dispense.
RESERVED 1
17
RESERVED 2
30