Power Supply Requirements
24V +/- 10%
Options:
l Internal illumination (non-HPIL*): 250 mA maximum, 5 W
l Internal illumination (HPIL*): 2.2 A maximum, 6 W
l External illumination: up to 800 mA average, 20 W, peak current
according to illumination, these values depend on the illumination
and its configuration
Supplied by LPS or NEC class 2 only
*HPIL denotes one of the DM360-HPIL-RE or DM360-HPIL-RE-P accessories
Light Connector
Current load up to 630 mA average
Ethernet Speed
10/100
Duplex Mode Full duplex or half duplex
19
To Next Page
Loading...
