Installing the In-Sight 2000
19
Summary of Camera Specifications
A summary of In-Sight 2000 camera specifications appears below in Table 6.
Table 6. In-Sight 2000 Camera General Specifications
Specification Description
Part Number 118-0034
Acquisition n Rapid reset, progressive scan, and partial acquisition modes
n Up to 30 full frames per second
n Up to 640 x 480 image size, with 256 gray levels (8 bits per pixel)
Sensor n 1/3-inch CCD (4.8 x 3.6 mm, 6 mm diagonal)
n 307,200 pixels (640 x 480 image)
n Square pixels, 7.4 x 7.4 µm
n Electronic shutter speed: 0.064-1000 ms
Lens C-mount lens
I/O n Trigger input: low (0.0-0.8 VDC) to high (3-24 VDC)
n Strobe output: 10-mA pulse, duration of two horizontal scan lines (128 µsec)
n Connected through a detachable 4-pin terminal plug
Mechanical n Dimensions (excludes lens, includes mounting block)
Length: 3.65 in., Width: 1.52 in., Height: 1.7 in
39 (width) x 43 (height) x 93 (depth) mm
n Aluminum housing
n Weight: 5.6 oz (160 g)
Mounting n Non-conductive plastic mounting block with ¼-20 threaded hole and two M6 threaded holes
Environmental n Operating Temperature: 10 to 45°C
n Operating Humidity: 10 to 90% non-condensing
n Storage Temperature: -10 to 65°C
n Storage Humidity: 10 to 90% non-condensing
Cable
RJ-45 to RJ-45, shielded twisted pair. Available lengths: 15 ft (4.5 m), 30 ft (9.1 m), 50 ft (15.2 m).
Gain and Offset
Controlled by software
Power 12 VDC, supplied by the In-Sight processor
To Next Page
