Need help?Do you have a question about the Cognex AS200 and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| Supported Barcode Types | 1D, 2D |
| Type | Barcode Reader |
| Dimensions | 44.5 mm x 44.5 mm x 25.4 mm (1.75 in x 1.75 in x 1.0 in) |
| Weight | 65 g (2.3 oz) |
| Operating Temperature | 0° C to 45° C (32° F to 113° F) |
| Storage Temperature | -20° C to 70° C (-4° F to 158° F) |
| Humidity | 5% to 95% (non-condensing) |
| Power Supply | 24V DC |
| Current Consumption | 300mA @ 24V DC |
Guide on installing the AS200 Alignment Sensor.
Guide on configuring the AS200 Alignment Sensor software.
Steps to connect the Ethernet cable to the vision sensor.
Steps to connect the breakout cable to the power supply.
Lists commands for PLC/Robot integration.
Configures, modifies, and deletes sensors.
Configures, modifies, and deletes recipes.
Locates and identifies connected cameras for sensor setup.
Assigns a static IP address to the camera.
To Next Page
