TD-000 796-E
Edition 10/2019, Subject to alteration
Copyright by COLASIT AG Spiez
13 Retrofittable original accessories
If not already a part of our scope of supply, these original parts are available ex stock when ordered.
- Frequency converters
- Elastic sleeves
- Vibration dampers
- Condensats drains
- Motor cover for outdoor installation
- Splinter protection
14 Fan identification
The following rating plate is affixed to each COLASIT fan:
1 Manufacturer
2 Field for CE marking and applicable standards
3 ATEX-identification, for details see the section on Explosion Protection
4 Fan specifications: fan type, casing design, material of casing and impeller, order number and date of
manufacture.
5 Technical specifications
Part 2: Units
15 Design and function of the CMV 450-800
All impellers in this series are balanced to better than Q 6.3 according to ISO 21940.
The casing with its thermoplastic rear panel is screwed onto the support base and can be easily dismantled
for inspection or cleaning purposes.
The fans are available in 2 standard designs
• Direct drive
• V-belt drive
As a basic principle, plastic fans are to be installed on the intake side in order to avoid leaks.
To Next Page
Loading...
