Coleman 9271H133 User Manual

Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with doors
facing desired direction. (illus. 1)
–Stake down tent corners, using
the tent stake loops.
Keep the floor taut.(illus. 2)
–Assemble all poles by interlocking
shock-corded poles.
–Insert the longer Center Frame Poles into
Center Pole Sleeves. The poles should cross
forming an “X” in the middle of tent. (illus. 1)
–Insert the shorter Side Frame Poles through the pole
sleeves located at the sides of tent. (illus. 1)
Connect Frame to Tent
–Unzip doors.
–Locate the Pin & Ring Systems on
either side of the front doors and the
corresponding Pin & Ring on the
back side of tent.
–Insert one end of Frame Pole onto
Pin & Ring System on tent stake
loop on either side of the doors. (illus. 3)
–Go to opposite end of pole diagonally
from starting point and gradually
apply pressure to the pole forming an
arch until you are able to insert the
Pin into pole end.
–Repeat for second pole.
–Attach tent frame clips to poles.
13’x13’ Ridgeview
1
2
When You Are Ready To Set Up Your
Tent
–Select a level campsite clear of rocks,
branches and other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
Side Tent
Poles
Rainfly Pole
Rainfly Part No. 9271H103
Center Tent
Poles
Door
Door
Instructions apply to Part Number 9271H133
illus. 1
illus. 2 Tent
stake through
stake loop
illus. 4
Center section upright
Part No. 9270A102
Part No. 9271A105
Part No. 9270A103
illus. 3
Ring & Pin System
Center poles
Side pole
Side pole
Center poles
Sidepole
Sidepole

Coleman 9271H133 Specifications

General

Brand	Coleman
Model	9271H133
Category	Tent
Language	English

Summary

Layout and Positioning of Tent

Campsite Selection and Tent Placement

Choose a level, clear campsite away from trees. Position tent for wind.

Staking and Pole Assembly

Stake tent corners taut. Assemble all poles by interlocking sections.

Inserting Center Frame Poles

Insert longer center frame poles into sleeves, crossing them to form an 'X'.

Inserting Side Frame Poles

Insert shorter side frame poles through sleeves located at the tent sides.

Connecting Frame to Tent

Locating Pin & Ring Systems

Find pin & ring systems on front and back doors of the tent.

Attaching Frame Poles

Attach frame pole ends to pin & ring systems, arching to connect.

Securing with Frame Clips

Attach tent frame clips to the poles to secure the structure.

Raising Tent Ends

Attaching Side Poles

Insert side frame pole ends onto pin & ring systems. Repeat for other side.

Arch and Secure Poles

Arch poles to fit pins. Attach frame clips to secure the structure.

Attaching Rainfly

Assembling Rainfly Poles

Assemble rainfly poles by interlocking shock-corded sections.

Inserting Rainfly Poles

Insert rainfly poles into sleeves on underside of rainfly near doors.

Draping and Securing Rainfly

Drape rainfly over tent, poles down. Secure with ties and 'S' hooks.

Attaching Guy Lines

Attach guy lines to rainfly loops and stake them out at an angle.