EasyManua.ls Logo

Coleman CEDAR PASS 9160-908 User Manual

Coleman CEDAR PASS 9160-908
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Connect Frame to Tent
– Insert one end of main tent pole onto
pin of ring and pin system, at tent
corner. (illus. 3)
– Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.
– Repeat for second pole. (illus. 4)
CEDAR PASS
TM
DOME
1
Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with door
facing desired direction. (illus. 1)
– Unzip door.
– Stake down tent corners only, using the
stake loops. (illus. 2) Keep the floor taut.
Assemble Frame Poles by interlocking
shock-corded poles.
– Insert the poles into Pole Sleeves.
The poles should cross forming
an “X” in the middle of tent. (illus. 1)
2
When You Are Ready
To Set Up Your Tent
– Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
– Do not set up your tent under trees.
For best results in windy conditions,
position the end of tent into the wind.
(1) Rainfly
Pole
Rainfly Part No. 9160-306
(2) Main Tent
Poles
POLE ASSEMBLY PARTS
Instructions apply to Part Number 9160-908
illus. 4
Tent frame
set-up
Part No. 9160-302
Part No. 9160-304
illus. 3
Insert pin into pole end
Assembled
poles
inserted
through
pole
sleeves
illus. 1
illus. 2 Tent stake through ring
Question and Answer IconNeed help?

Do you have a question about the Coleman CEDAR PASS 9160-908 and is the answer not in the manual?

Coleman CEDAR PASS 9160-908 Specifications

General IconGeneral
Capacity6-Person
Number of Poles3
Pole MaterialFiberglass
Doors1
Seasons3-Season
WindowsYes
ModelCEDAR PASS
TypeTent
Dimensions10 ft x 9 ft
Peak Height72 inches
MaterialPolyester
Floor MaterialPolyethylene

Summary

Tent Setup Preparation and Pole Assembly

Campsite Selection and Tent Placement

Guidance on choosing a level campsite and positioning the tent optimally.

Tent Pole Assembly and Frame Connection

Instructions for assembling tent poles and connecting them to form the tent's frame.

Attaching Tent Components

Attach Tent to Frame

Steps to attach the tent body to the assembled frame poles using clips.

Attach Rainfly

Instructions for assembling and attaching the rainfly to the tent frame.

Important Tent Usage and Care Information

Tent Usage Precautions

Advice on condensation, storage, stake removal, and pole storage.

Safety Warnings

Crucial safety information regarding flame and heat sources.

Related product manuals