Using the Entertainment System
31
Coleman logo (white)
<----------
Coleman
®
Spas (online sales)
LTR50001135, Rev. A
Before you begin, make sure the
docking bay is OFF.
If the red Power light inside the
docking bay is on, press it once to
turn it o.
Press the red
Power button on
the remote.
1
While still holding
the Mode button,
press the Power
button inside the
docking station.
3
If this is done correctly, the display on the remote will read
WELCOME or show a mode position such as RADIO, IPOD, or AUX IN.
Press and hold the
Mode button on the
remote. The display on
the remote will read
PAIR.
2
Synchronizing the Remote Control with the Docking Station
Before you can use the remote control with the docking station, they need to be synchronized.
Note: Synchronizing instructions apply to both Aquatic AV model AQ-DM-4B and model AQ-DM-4UBT. Both
the unit and the remote must be marked “Version 1.1” to be compatible. The docking station has a small
label inside the unit and the remote is marked on its reverse side. If your docking bay or remote do not have
these labels, contact customer support at 1-800-225-7727 for instructions on synchronizing your remote
and docking station.
Using the Docking Station Panel Controls
Model AQ-DM-4UBT has basic controls built into the front panel. They are briefl y described below. For
further information, see the manufacturer’s manual.
Power button
Forward or reverse
radio scan or track
selection
Mode button
Volume control
To Next Page
Loading...
Need help?
General
