Coleman CT200U-EX V Assembly Instructions

STARTING ENGINE
STARTING ENGINE
To start the engine
1. Place the fuel valve (1) to the “ON”
(right) position
2.. If engine is cold, place the choke lever
(2) to the “ON” (left) position.
3. Place the ON/OFF switch (3), located on
the handlebars, to the (on)position.
4. Pull the starter recoil cord to start the
engine.
5. Once engine has warmed up for a few
minutes, place the choke lever (2)
back to the “OFF” (right) position.
1
2
Starting or running the Mini Bike in
an enclosed area such as a garage
or shed where there is no
ventilation is hazardous.
Inhaling exhaust fumes from the
Mini Bike can cause severe injury
or death.
Never start or run the Mini Bike in
an inclosed environment where
there is no ventilation. Always start
and run outdoors.
!
WARNING
3
14

Coleman CT200U-EX V Specifications

General

Horsepower	6.5 hp
Weight Capacity	200 lbs
Fuel System	Carburetor
Starting System	Recoil start
Final Drive	Chain
Frame	Steel
Rear Brake	Drum
Top Speed	24 mph
Transmission	Automatic
Tires	19 x 7-8
Dry Weight	119 lbs
Engine Type	Air-cooled, 4-stroke, single-cylinder