4-7 Control Functions
To change the display from miles per hour to
kilometers per hour press the right side
button on the display. This will also change
the displayed mileage from miles to
kilometers.
Clock time adjustment
Press the left button and hold for three
seconds and the clock goes into the hour
‘set’ mode.
1. Press the right button to set the hour.
2. Press the left button again and the clock
goes into the minute ‘set’ mode.
3. Press the right button to set the minutes.
4. Press the left button again and the clock
will exit the ‘set’ mode.
Four-
wh
eel drive indicator “ ”
There are two 4WD indicators on the display
panel. The left 4WD indicator has a blinking
circle on the front axle when the grey and
yellow 4WD selector buttons are pressed in
indicating the “4WD” function has been
activated. This position also indicates that
the 4WD is NOT locked. This allows the
wheels on the left and right sides to rotate at
different speeds to accommodate turning.
Dierential gear lock indicator
The right 4WD symbol will show an ‘X’ over
the center of the front axle
when the lever is
moved to the right and the yellow differential
gear lock button is set to “out” position, which
To Next Page
Loading...
