Control Functions 4- 10
Switches
1. Light switch “OFF/ / ”
Light S witch “ OFF/ / ”
S et the switch to “
”to turn on the low beam
and the taillights.
Set the switch to “
”to turn on the high
beam and the taillights.
Set the switch to “OFF” to turn o all lights.
CAUTION :
Do not use the headlights with the engine
turned off for an extended period. The battery
may discharge to the point that the starter
motor will not operate properly. If this should
happen, remove the battery and recharge it.
To Next Page
Loading...
