Selecting the Game for the Button Layouts
Secondary Menu Mode has been overhauled in order to simplify the
numerous button layouts that are available to players. To select a different
button layout you must first ENTER the SECONDARY MENU by simply
HOLDING RIGHT D-PAD for 5 seconds until the LEFT 1&2 White LED’s
are lit to let you know it is in SECONDARY MENU MODE. You must stay
holding the RIGHT D-PAD while you are selecting all options. If the 3&4
White LED’s are lit that means you have entered Secondary Menu mode
correctly, but the Bumpers and Triggers are “Flipped”.
As there are so many options available, a Quick Check feature of your
current Game and Button layout has been implemented. At any time while
in SECONDARY MENU MODE you can display what your current Game
Selection is by pressing X. The Right Trigger will RUMBLE accordingly to
show the game selection. Also, you can display what your current
BUTTON LAYOUT is for that game by pressing B. The 4 GREEN LED’s
will flash to let you know the BUTTON LAYOUT selected.
NOTE: Layouts are SAVED. This means that once your favorite layout is
chosen, it will be remembered even when you disconnect the Eliminator.
Choosing the Game & Layout
Choosing the Game & Layout First you must select the GAME you are
playing to choose the appropriate button layout selection. There are five
GAME selections currently available: COD: WWII / COD: Infinite Warfare
(Default, 1 Right Trigger Rumble), COD: Black Ops III (2 Right Trigger
Rumbles), Destiny Series (3 Right Trigger Rumbles), Battlefield Series (4
Right Trigger Rumbles) and Fortnite (5 Right Trigger Rumbles). The
default layout can often be used to allow some mods in generic shooters.
To choose the appropriate game you MUST enter Secondary Menu Mode
by HOLDING RIGHT D-PAD for 5 seconds until the LEFT 1&2 White
LED’s are lit to let you know it is in SECONDARY MENU MODE. (If the
3&4 White LED’s are lit, that means you have entered Secondary
Menu mode correctly but the Bumpers and Triggers are “Flipped”). Then
simply press the RIGHT TRIGGER (RT) to increase the game number and
the Right Trigger will RUMBLE accordingly.
Simply press the LEFT TRIGGER (LT) to decrease the game number and
the Right Trigger will RUMBLE accordingly. Once the game is chosen you
can now choose from the below button layouts. Remember that the button
layout chosen here MUST match the button layout in the game settings for
the MODS to work correctly. To choose the layout simply press the MENU
button (you must still be in Secondary Menu mode via holding the RIGHT
D-PAD) to increase the layout number and the 4 Right GREEN LED’s will
flash accordingly. To decrease the layout number, press the VIEW button
and the 4 Right GREEN LED’s will flash accordingly. Once you reach the
DEFAULT selection the LEFT LED’s will FLASH WHITE once to let you
To Next Page
Loading...
