16
Instruction Manual - Twin Master
3
4
5 - Machine preparation
5.1 - Leveling and coupling to the tractor
a) On a rm and at place, turn the crank (1) of the stand
jack (2) in a such way that the Combine be leveled
(parallel) in relation to the soil.
b) Put the tractor near the Gatherer. Draw-bar should
coincide with the coupling terminal of the header (3).
In case there is need, adjust the draw-bar according
to your tractor Instruction Manual.
c) Couple the tractor draw-bar with the coupling system
of the Combine and put the lock.
d) Release the stand jack using the crank, release the
pin and put it in transporting position (4).
2
1
To Next Page
Loading...