Colombo Twin Master - Table of Contents; Introduction

4
Instruction Manual - Twin Master
Index
1 - Introduction ................................................................................... 4
2 - Safety instructions .......................................................................... 6
2.1 - When reading the Instruction Manual ......................................... 6
2.2 - Safety decals found on the Combine .......................................... 6
2.3 - When operating the machine ..................................................... 7
2.4 - When performing machine maintenance ..................................... 8
2.5 - Transport of the machine towed by tractor on public roads and
streets ......................................................................................... 9
2.6 - Transport on truck ................................................................... 9
3 - Identication, features and technical specications .............................. 10
3.1 - Components identication......................................................... 10
3.2 - Running principle .................................................................... 11
3.3 - Technical specications............................................................. 12
4 - Work conditions .............................................................................. 14
4.1 - Soil characteristics .................................................................. 14
4.2 - Recommendations for a good mechanical harvest ....................... 15
5 - Machine preparation ........................................................................ 16
5.1 - Leveling and coupling to the tractor ........................................... 16
5.2 - Hydraulic coupling ................................................................... 17
5.3 - Removing the hydraulic hoses ................................................... 18
5.4 - Grain elevator assembly ........................................................... 19
5.5 - Pickup unit assembly ............................................................... 20
5.6 - Cardan length adjustment ........................................................ 20
6 - Adjustments to start the operation .................................................... 21
6.1 - Power take off rotation ............................................................. 21
6.2 - Tractor work speed .................................................................. 21
6.3 - Pickup unit ............................................................................. 21
6.4 - Beating cylinder (FABI) ............................................................ 22
6.5 - Cleaning system ...................................................................... 24
7 - Operating the combine ..................................................................... 25