Need help?Do you have a question about the Colortrac Z36 Series and is the answer not in the manual?
Highlights electrical, mechanical, and handling safety precautions.
Lists do's and don'ts for safe scanner operation and handling.
Detailed steps for replacing the scanner's interface board.
Procedure for replacing the scanner's main logic board.
Instructions for removing and replacing the scanner's timing belt.
Steps for removing and replacing the scanner's drive motor.
Steps to restore the system to factory defaults or a previous image.
Instructions for updating the scanner's system firmware.
Accessing advanced settings for scanner calibration and adjustments.
Procedure to adjust motor speed for scan length accuracy.
Restoring scanner calibration data after board replacement.
List of error codes, their modules, and descriptions for troubleshooting.
To Next Page
General