General Operation
• Zero Speed Detect: with the run/tow switch in the run position, the E-Merge's motor will inhibit the vehicle
from rolling until the accelerator is depressed. When pushed, motor braking should only allow the vehicle
to travel 1 to 3 mph. When such motion is detected, a buzzer will sound.
• Motor Braking: the top speed of the E-merge is limited even while going down an incline. The motor will
engage to limit the top speed of the vehicle. The motor acts as a generator, transferring some of the excess
energy to recharge the batteries.
• Pedal-Up Braking: the E-Merge will also apply some slight motor braking while stopping. A slight extra force
may be felt while coming to a complete stop. This indicates a transfer of some of the excess energy back
into the batteries.
To Next Page
Loading...
