CALOR 40 Manual Page 19 (total 27) COMAC CAL s.r.o.
Tariff1 setting
Tariff2 setting
Tariff3 setting
Qmin [m
3
/h] setting
Qmax [m
3
/h] setting
Pulse output constant E [MJ/pulse]
Pulse output constant V [l/pulse]
Pulse input constant V1 [pulse/l]
Ethylene glycol mixture ratio [%]
5) Diagnostics Menu:
Energy factor [kJ/m
3
]
Enthalpy - supply [kJ/kg]
Enthalpy - return [kJ/kg]
Reverse volume [m
3
] (reverse volume in reverse direction flow)
Sensor offset [mV] (service data for sensor diagnostics)
Uptime [Days-hrs]
Total downtime [Days-hrs]
Error code
Number of samples out of parameters
Menu nomenclature:
E energy Tp temperature - supply
Etar energy in given time tariff Tv temperature - return
Em monthly energy dT temperature
difference
V volume Q flow rate
Vm monthly volume P power
VinX volume from external water meter X max maxima
VinXm monthly volume from external water meter X min minima
Basic parameter setting
As this is a billing meter, any intervention in the set-up is illegal. Any tampering with the
seals on the meter and on thermometer wells, flow meter and inside the evaluation electronics
is also illegal.
The equipment is delivered with adjusted date, time and the other parameters as per customer
requirements and the basic data are indicated on the front panel of the meter or flow meter.
Any modification to setting cam only be performed by the manufacturer or by the
organization authorized by him which will attach new production or assembly seals. The
metrology seals must not be damaged during these operations!
User settings
User settings can be modified by means of integrated USB interface. Setting is carried out by
means of the "CALOR-40 Setup" configuration software.
It is possible to modify the constants of the following items:
Eout [MJ/pulse]
Vout [l/pulse]
To Next Page
Loading...
