COMAC CAL FLOW 38 User Manual

Manual FLOW 38 Page 11 (total 54) COMAC CAL s.r.o.
Installation in piping and placement of measuring electrodes in flow sensor
1) in the version without the earthed reference electrode and/or empty piping test (2 electrodes)
2) in the version with earthed electrode and/or empty piping test electrode (3/4 of the electrode)
During installation, beware of:
- dropping the meter onto the ground and damaging the measuring tube or electronics
- contamination of the electrodes (do not touch the electrodes, otherwise they get contaminated)
- when additional sealing is used, avoid its interference in the flow profile of the detector
between the flanges and the pipeline, otherwise the flow measurement error may be increased

COMAC CAL FLOW 38 Specifications

General

Brand	COMAC CAL
Model	FLOW 38
Category	Measuring Instruments
Language	English