COMAC CAL FLOW 38 User Manual

Manual FLOW 38 Page 54 (total 54) COMAC CAL s.r.o.
Returning the meter to COMAC CAL s.r.o.
The meter you have was made with the maximum precision and it has been checked many times and wet
calibrated.
If the meter is used in agreement with this manual, the occurrence of faults is very rare. Should they ever
occur, contact our service department. If you return the meter to the manufacturing plant, adhere to the
conditions stated below:
- Clear the meter of contaminations stuck to the sensor and measuring tube (eventually to the
Evaluation Unit).
- If the meter was run with poisonous, etching, combustible liquids or with fluids dangerous to
water, check it and if appropriate, flush and neutralize the cavities inside the sensor.
Please attach full description of the fault. COMAC CAL s.r.o. will not be able to process your request
promptly and correctly without this form.

COMAC CAL FLOW 38 Specifications

General

Brand	COMAC CAL
Model	FLOW 38
Category	Measuring Instruments
Language	English