COMAC CAL FLOW 38 - Page 40

Manual FLOW 38 Page 40 (total 54) COMAC CAL s.r.o.
Communication parameters:
2400Bd
paEven
8 data bits
1 stop bit
Address: last two digits of the serial number
Diagnostics
Reception and transmission can be diagnosed in SET menu, communication line 1 - RS485 settings.
Rx - reception on line 1 (RS4858, MBus/Modbus)
Tx - transmission on line 1 (RS485, MBus/Modbus)
R1 - reception on line 2 (MBus expansion module)
T1 - transmission on line 2 (MBus expansion module)