ComAp IG-NTC-BB - Page 308

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
308
Description
Logical analog input for cylinder temperature #13. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 14
Related FW
3.0
Description
Logical analog input for cylinder temperature #14. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 15
Related FW
3.0
Description
Logical analog input for cylinder temperature #15. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 16
Related FW
3.0
Description
Logical analog input for cylinder temperature #16. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 17
Related FW
3.0
Description
Logical analog input for cylinder temperature #17. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 18
Related FW
3.0
Description
Logical analog input for cylinder temperature #18. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.