InteliLite
NT
– AMF20/25, SW version 2.2, ©ComAp – September 2014 122
IL-NT-AMF-2.2-Reference Guide.pdf
Add new gen-set dialog in WebSupervisor:
Should you encounter any troubles with connection, check the faultcodes on the same screen
and find detailed description in Diagnostic codes listed lower.
12. Open LiteEdit PC software or enter your WebSupervisor account at
http://websupervisor.comap.cz.
Hint:
For opening a new WebSupervisor account kindly send e-mail to admin.websupervisor@comap.cz
your Name, Login name, E-mail address and Timezone. We will create free account for you. Details
at: http://www.comap.cz/products/detail/WebSupervisor .
Communication is now ready for use.
Hint:
To reduce the data traffic over GPRS network you can set in setpoint group „Comms Settings“
the parameter „AirGate IP“ = 80.95.108.26. This will save significant data amount needed for
translation of Airgate server IP address. In case of changing the server IP address this settings has to
be updated or returned to default „airgate.comap.cz“.
Hint:
From its nature the GPRS connection can from time to time drop for a short time due to a number of
reasons affecting the cellular network. However the system is designed in the way that controller will
automatically reconnect back.
GSM Diag Code – Diagnostic code for IL-NT-GPRS modem
Table of Diagnostic Codes:
To Next Page
Loading...
Need help?
General
