ComAp intelilite nt amf20 User Manual

InteliLite
NT
– AMF20/25, SW version 2.2, ©ComAp – September 2014 43
IL-NT-AMF-2.2-Reference Guide.pdf
Analog inputs are designed for resistive sensors with resistance in range of 0 to 2,4k.
To ensure a proper function use shielded cables, especially for length over >3m.
COM terminal is dedicated to measure ground voltage potential difference between engine and
controller.
As binary input
Open, close state are detected, threshold level is 750 .

ComAp intelilite nt amf20 Specifications

General

Brand	ComAp
Model	intelilite nt amf20
Category	Controller
Language	English