IGS-NT Communication Guide
122
8.5 Converter CAN ↔ CAN
Allows to change the baudrate. Can be usefull to connect specific types of ECU.
Allows to map CAN identifier to another. Usefull in case of collision at the CAN bus.
Allows to filter range of CAN identifiers. May be appropriate at sites with heavy traffic on the CAN bus.
8.5.1 Recommended converter
I-7532:
www.icpdas.com
From FW 1.4 and higher allows to map short CAN identifiers to long and vice versa.
8.6 Recommended optical USB extension cables
Opticis M2-100-xx opticis.com
USB Rover 200 www.icron.com
8.6.1 Radio Link
Useful when the control room is distant from the site
Can be more economical than to hard wire it
To Next Page
Loading...
Need help?
General
