ComAp InteliSys NTC BaseBox User Manual

IGS-NT Communication Guide
95
00 DC
= Value of battery voltage
DC HEX => 220 DEC => Batt. voltage is
represented with 1 decimal => 22,0 VDC
convert the data from hex to dec. Use the
multiplication factor (In this case 0.1)!
DD B9
= Check field calculation (page 143)
Check with your CRC, because of data validity

ComAp InteliSys NTC BaseBox Specifications

General

Brand	ComAp
Model	InteliSys NTC BaseBox
Category	Controller
Language	English