ComAp IS-NTC-BB User Manual

IS-NT-Async-SPI, SW Version 1.2, ©ComAp – February 2011
IS-NT-Async-SPI-1.2.PDF
15
Engine stopping procedures
Normal engine stop:
1s
BO: Stop pulse
BO: Stop solenoid
Stop time
BO: Fuel solenoid
RPM + pick - up signal
Typical engine stop time
Correct setting – Stop time
setpoint is set to longer
time than typical engine
stop time.
Pick-up sensor fault – forced engine stop:
Normal engine stop, but Stop time is set too short:

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English