Comco MicroBlaster MB1000 - Page 74

Appendix A: Assemblies, Components, and Parts MicroBlaster MB1000
Comco Inc. A-4 Issue Date: July 2016
MAJOR ASSEMBLIES AND PRINCIPAL PARTS (cont’d)
PART NUMBER DESCRIPTION QTY.
MB1402-13 Cabinet, Assy. 1
 MB1227-1
[5]
Socket, Neon, 115VAC 1
 MB1229 Diode, Rectifier 2
 ST7003 Switch, Toggle, DPST 1
 ST7004 Lamp, Neon 1
 ST7005 Holder, Fuse 1
 ST7007-7 Conn. Block Terminal 1
 ST7008 Jumper, Terminal Block 1
 ST7015 Footswitch, SPST 1
 ST7016
[5]
Cord, Power, 115VAC 1
 ST4012 Tube, plastic 1/4" A/R
 ST7625-010
[5]
Fuse, 1 amp 1
MB1403-4 * Regulator, Cutting Speed, Assy. 1
 MB1560 Filter & Check Valve Assy. 1
 MB1376-1 Regulator, 0-125 1
 ST4004 Elbow, Street, 1/8P 1
 ST4006 Connector, 1/4T, X 1/8P 1
 ST4010 Elbow, Male 1/4T x 1/8P 1
 ST4011 Tee, Male Run, 1/4T x 1/8P 1
 ST4036 Tee, Female 1/8P 1
 ST4018 Tee, Male 1
 ST4050 Nipple, 1/8P x 1-1/4 Lg 1
MB1404-13 * Tank Assy, Powder, Acme Thd 1
 MB1025-5 Tube, Bypass 1
 MB1328-13 Tank, Powder, Acme Thd 1
 ST4004 Ell, Street, 1/8P 2
 MB1455 Connector, Quicknut 2
 ST4010 Elbow 1
 ST4110 Nipple, 1/8P x 2-1/2 Lg 1
 ST4130 Elbow, Street, 0.125", 45 1
 ST4131 Cross 1
[5]
230 V parts are: Socket MB1227-2; Cord ST7235; Fuse ST7625-005.
* Non-standard parts. See individual part drawings, Appendix B, for information
on choosing correct part numbers.