Comelit 4681 - Page 19

19
CODE DIP SWITCHES ON
FUNCTIONS
De-misting heating element
213 1,3,5,7,8 OFF (default)
212 3,5,7,8 ON
Audio-visual messages
195 1,2,7,8 Hebrew
196 3,7,8 Polish
197 1,3,7,8 Catalan
198 2,3,7,8 Galician
199 1,2,3,7,8 Basque
206 2,3,4,7,8 Danish
207 1,2,3,4,7.8 Norwegian
211 1,2,5,7,8 Swedish
215 1,2,3,5,7.8 Italian
216 4,5,7,8 French
217 1,4,5,7,8 Spanish
218 2,4,5,7,8 Dutch
219 1,2,4,5,7.8 Greek
220 3,4,5,7,8 English
221 1,3,4,5,7.8 German
222 2,3,4,5,7.8 Portuguese
202 2,4,7,8 Enables voice message (door opened warning) when the RTE contact is closed
203 1,2,4,7,8
Disables voice message (door opened warning) when the RTE contact is closed (default
setting)
210 2,5,7,8 Visual messages only
214 2,3,5,7,8 OFF (default)
Actuator command management
N.B. Art. 1256 in generic actuator mode must not be present in the system.
227 1,2,6,7,8 Actuator function on S serial line = enabled
228 3,6,7,8 Actuator function on S serial line = disabled (default)
229 1,3,6,7,8 C.NC.NO relay activation on actuator command: 2 sec
230 2,3,6,7,8 C.NC.NO relay activation on actuator command: 4 sec
231 1,2,3,6,7.8 C.NC.NO relay activation on actuator command: 8 sec
Door lock
245 1,3,5,6,7.8 Door lock time: 2 sec + disabling tone (default)
246 2,3,5,6,7.8 Door lock time: 4 sec
247 1,2,3,5,6,7,8 Door lock time: 8 sec
248 4,5,6,7,8 Door lock confirmation tone: enabled
251 1,2,4,5,6,7,8 Relay C.NC.NO in parallel to SE (default)
252 3,4,5,6,7.8 Lock-release always enabled (default)
253 1,3,4,5,6,7,8 Lock-release only enabled for user called
System functions
232 4,6,7,8 Awaiting response time: 60 sec (default)
233 1,4,6,7,8 Awaiting response time: 120 sec
234 2,4,6,7,8 Awaiting response time: 30 sec