Comet KM basic - Electrical Connections; Hydraulic Circuit

22
EXTRA
3.11 5.13 5.15 8.15
ELECTRICAL CONNECTIONS
Power supply 230 V
1~50 Hz
400 V
3~50 Hz
Input (kW - CV) 3,0 - 4,1 4,8 - 6,5 7,0 - 9,5
Fuse 16 A
HYDRAULIC CIRCUIT
Maximum supply water temperature (°C - °F) 60 - 140
Minimum supply water temperature (°C - °F) 5 - 41
Minimum supply water ow rate (l/min - USgpm) 13 - 3,4 16 - 4,2 18 - 4,8
Maximum supply water pressure (bar - psi) 8 - 116
Maximum priming depth (m - ft) 0 - 0
Inlet water box YES
PERFORMANCE
Maximum ow rate (l/min - USgpm) 11 - 2,9 13 - 3,4 15 - 4,0
Nominal ow rate (l/min - USgpm) 10,5 - 2,8 12 - 3,2 14 - 3,7
Max pressure with water outlet
temperature up to 108 °C - 226 °F (bar - psi) 120 - 1740 180 - 2610 160 - 2320 200 - 2900
Max pressure with water outlet
temperature up to 140 °C - 284 °F (bar - psi) 32 - 464
Nominal pressure with water outlet
temperature up to 108 °C - 226 °F (bar - psi) 110 - 1595 170 - 2465 150 - 2175 190 - 2755
Maximum reaction force on the spray gun (N) 24 36 38 45
Sound pressure level - Uncertainty (dB(A)) 84,9 - 0,7
(1)
Sound power level (dB(A)) 92
(1)
Operator hand-arm vibration - Uncertainty (m/s
2
) 2,0 - 0,24
(1)
PUMP OIL AGIP ROTRA MULTI THT
(2)
WEIGHT AND DIMENSIONS
Length x width x height (mm - in) 950 x 620 x 850 - 37,4 x 24,4 x 33,5
Weight (kg - lb) 120 - 265 125 - 276
Diesel tank (l - USgal) 18 - 4,8
Detergent tank (l - USgal) 3,5 - 0,9
Anti scale tank (l - USgal) 2,5 - 0,66
(1)
Measurements in agreement with 60335-2-79.
(2)
Also see the corresponding oils table.
The characteristics and specications are guidelines only. The manufacturer reserves the right to make all modications to the equipment deemed necessary.
AGIP ROTRA MULTI THT corresponding oils:
U.T.T.O.
(Universal Tractor Trasmission Oil)
API GL-4 John Deere J20A
Massey-Ferguson M-1135 Ford M2C - 86 B Esso Torque Fluid 62
Mobil Mobiluid 422 Ford M2C - 134 B/C Shell Donax TD