COVER series MZ – User manual
COMEX S.A.
Figure 5-30 Password settings
5.9. System speaker
When an alarm situation occurs, the system informs you about the event with an audible signal.
The user can always mute or activate the alarm by clicking on the icon . After silencing the
alarm, the arrival of a new one will cause the signaling to be restarted.
5.10. Turn On/Off
Clicking the icon , goes to the page Enable / Disable the UPS inverter. Depending on the
current operating mode (inverter on or off), you will go to the page as in the picture below. To
confirm the operation, press OK.
Figure 5-31 On / Off page of the inverter
To Previous Page
Loading...
General