For your safety, using T500 for any purpose other than 3d printing is not
recommended, or the risks are on yourself.
To ensure best print quality, please don't place T500 on a tilt or waggling
platform.
The shaking of the machine will affect the printing quality of the printer.
Please do not place the machine near flammable and explosive
materials or near highheat sources.
Please place the machine in a ventilated, cool and dust free environment.
It is recommended to use the material recommended by the
manufacturer to avoid machine damage.
Do not use any other power cable except the one supplied in package.
Always use a grounded three-prong power outlet.
Wearing cotton gloves when operating the printer is strictly prohibited.
Such gloves may become tangled in the printer's moving parts which
leads to burns, possible injury, or printer damage.
Please wait until the print bed cools down to remove the print.
It’s not recommended to use the third party firmware or mainboard etc,
or the warranty will be void.
Clean the printer frequently. Always turn the power off when cleaning,
and wipe with a dry cloth to remove dust, adhered printing plastics or
any other material off the frame, guide rails, or wheels. Use glass
cleaner or isopropyl alcohol to clean the print surface.
Children under 10 years old should not use the printer without
supervision.
Do not manually move the extruder and printing platform while printing.
Users should comply with the laws and regulations of the corresponding
countries and regions where the equipment is located (used), abide by
professional ethics, pay attention to safety obligations, and strictly
prohibit the use of our products or equipment for any illegal purposes.
Comgrow will not be responsible for any violators' legal liability under
any circumstance.
01
Note
To Next Page
Loading...